blslivewire Posted July 15, 2017 Share Posted July 15, 2017 <blockquote data-ipsquote="" class="ipsQuote" data-ipsquote-username="tydezno" data-cite="tydezno" data-ipsquote-contentapp="forums" data-ipsquote-contenttype="forums" data-ipsquote-contentid="41542" data-ipsquote-contentclass="forums_Topic"><div>I am trying to install this following the directions. I went with Method 2. I downloaded the wrapper and extracted the download via 7zip. Once this was finished, went to step 5. I went to Install Software, found the TEW Setup.EXE and then get this error: <p> </p><p> Am I missing something???</p></div></blockquote><p> </p><p> </p><p> I have the exact same thing happening. Any luck?</p> Quote Link to comment Share on other sites More sharing options...
zackufc Posted November 24, 2017 Share Posted November 24, 2017 book marked Quote Link to comment Share on other sites More sharing options...
BasicThuganomics Posted November 27, 2017 Share Posted November 27, 2017 <p>Hey guys, I got it fixed on my Mac (running High Sierra).</p><p> </p><p> You'll need to start from the beginning, and <em>create your own wrapper</em>, don't download OP's wrapper.</p><p> </p><p> When you boot up the Wrapper initially, click into Set Screen Options and un-check Auto-Detect GPU.</p><p> </p><p> Then follow OP's instructions (I think later versions of Wineskin don't need you to do anything fancy for the Jet40 bit, it's much simpler than it was before).</p><p> </p><p> You should be good to go!</p> Quote Link to comment Share on other sites More sharing options...
zackufc Posted January 22, 2018 Share Posted January 22, 2018 After it try the first one I get an error and after hit run. I don't get what I am doing wrong. Quote Link to comment Share on other sites More sharing options...
zackufc Posted January 22, 2018 Share Posted January 22, 2018 I get connection error 429. Quote Link to comment Share on other sites More sharing options...
kowensjr1984 Posted January 23, 2018 Share Posted January 23, 2018 <blockquote data-ipsquote="" class="ipsQuote" data-ipsquote-username="JimmyStyles" data-cite="JimmyStyles" data-ipsquote-contentapp="forums" data-ipsquote-contenttype="forums" data-ipsquote-contentid="41542" data-ipsquote-contentclass="forums_Topic"><div>No new executables found!<p> </p><p> Maybe the installer failed...?</p><p> </p><p> If you tried to install somewhere other than C: drive (drive_c in the wrapper) then you will get this message too. All software must be installed in C: drive.</p><p> </p><p> I keep getting this overtime I click choose setup .exe</p></div></blockquote><p> </p><p> THIS</p> Quote Link to comment Share on other sites More sharing options...
Hassan Posted February 8, 2018 Share Posted February 8, 2018 <blockquote data-ipsquote="" class="ipsQuote" data-ipsquote-username="kowensjr1984" data-cite="kowensjr1984" data-ipsquote-contentapp="forums" data-ipsquote-contenttype="forums" data-ipsquote-contentid="41542" data-ipsquote-contentclass="forums_Topic"><div>THIS</div></blockquote><p> </p><p> bump for this too I have it also <img alt=":mad:" data-src="//content.invisioncic.com/g322608/emoticons/mad.png.69834f23b9a8bf290d98375f56f1c794.png" src="<___base_url___>/applications/core/interface/js/spacer.png" /></p> Quote Link to comment Share on other sites More sharing options...
Hassan Posted February 8, 2018 Share Posted February 8, 2018 <p>I've managed to get it installed, and it runs when I click test here, but how do i actually complete this stage and end up with a clickable program that runs the game?</p><p> </p><p> <span>http://i68.tinypic.com/b51xyd.png</span></p><p> </p><p> Im sooooo close and yet so far</p> Quote Link to comment Share on other sites More sharing options...
rktaker Posted June 8, 2018 Share Posted June 8, 2018 i can't get the premade wrapper to work for some reason does anybody know why? Quote Link to comment Share on other sites More sharing options...
rktaker Posted June 13, 2018 Share Posted June 13, 2018 sorry for this but TEW crasheed on me and now i can't get it to open again can anyone help? Quote Link to comment Share on other sites More sharing options...
Arlie Rahn Posted June 27, 2018 Share Posted June 27, 2018 <p>Here's a general thread on using Crossover or Wine to run Windows apps on a Mac:</p><p> </p><p> <a href="https://www.howtogeek.com/187359/5-ways-to-run-windows-software-on-a-mac/" rel="external nofollow">https://www.howtogeek.com/187359/5-ways-to-run-windows-software-on-a-mac/</a></p><p> </p><p> Here's a specific thread on Wine:</p><p> </p><p> <a href="https://www.howtogeek.com/263211/how-to-run-windows-programs-on-a-mac-with-wine/" rel="external nofollow">https://www.howtogeek.com/263211/how-to-run-windows-programs-on-a-mac-with-wine/</a></p><p> </p><p> In theory, this should work as well:</p><p> </p><blockquote data-ipsquote="" class="ipsQuote" data-ipsquote-username="BasicThuganomics" data-cite="BasicThuganomics" data-ipsquote-contentapp="forums" data-ipsquote-contenttype="forums" data-ipsquote-contentid="41542" data-ipsquote-contentclass="forums_Topic"><div>Hey guys, I got it fixed on my Mac (running High Sierra).<p> </p><p> You'll need to start from the beginning, and <em>create your own wrapper</em>, don't download OP's wrapper.</p><p> </p><p> When you boot up the Wrapper initially, click into Set Screen Options and un-check Auto-Detect GPU.</p><p> </p><p> Then follow OP's instructions (I think later versions of Wineskin don't need you to do anything fancy for the Jet40 bit, it's much simpler than it was before).</p><p> </p><p> You should be good to go!</p></div></blockquote> Quote Link to comment Share on other sites More sharing options...
SheepFM Posted August 1, 2018 Share Posted August 1, 2018 <p>help</p><p> </p><p> im getting an error message, can anyone help me</p> Quote Link to comment Share on other sites More sharing options...
lazlo123 Posted September 5, 2018 Share Posted September 5, 2018 <p>Please help</p><p> </p><p> I'm confused. I have the game downloaded, I have the mod downloaded, how do I get the mod into the game? I tried creating a wrapper for the 2009.rar that I'm using but it didn't work, the only thing that would work was my tew2016 file, but it looks like i just reinstalled the game instead of getting the mod on it. Please, what do I do?</p><p> </p><p> </p><p> Thanks.</p> Quote Link to comment Share on other sites More sharing options...
rktaker Posted October 2, 2018 Share Posted October 2, 2018 I know i post here a lot but whenever i try to run the winetricks part the app opens and it won't complete the process and says i have to close the wrapper before i do it and even though i close it multiple times it still opens and happens whenever i try to run vb6run well i figured that out now it said that it couldn't open cause the executable file wasn't found or something Quote Link to comment Share on other sites More sharing options...
Hassan Posted January 31, 2019 Share Posted January 31, 2019 <p>I still cannot get this to work on Wine</p><p> </p><p> I can go all the way through the install process with the demo for now, but when I set it to be the .exe file to actually run the game, just nothing happens, even when I do test run.</p><p> </p><p> I have had it working before which is so frustrating but I cannot figure out what is wrong here</p> Quote Link to comment Share on other sites More sharing options...
redgiant Posted March 5, 2019 Share Posted March 5, 2019 I get WMMA5 to work following this thread on Arch Linux. Installing `native_oleaut32` and `allfonts` via winetricks solves some UI issues like font, thumbnail color resolutions in WMMA5 I use a different WINEPREFIX so I have to do one more thing: Copy and rename ~/.wine/drive_c/windows/syswow64/OVSB~3IL.OCX to ~/.tew-wine/drive_c/windows/syswow64/ovsBooleanControls.ocx which can fix a crash on clicking in some buttons. Updated: This file also has to be copied: ~/.wine/drive_c/windows/syswow64/Msflxgrd.ocx to ~/.tew-wine/drive_c/windows/syswow64/Msflxgrd.ocx Quote Link to comment Share on other sites More sharing options...
Judoku1819 Posted March 5, 2019 Share Posted March 5, 2019 <blockquote data-ipsquote="" class="ipsQuote" data-ipsquote-username="redgiant" data-cite="redgiant" data-ipsquote-contentapp="forums" data-ipsquote-contenttype="forums" data-ipsquote-contentid="41542" data-ipsquote-contentclass="forums_Topic"><div>Copy and rename <strong>~/.wine/drive_c/windows/syswow64/OVSB~3IL.OCX</strong> to <strong>~/.tew-wine/drive_c/windows/syswow64/ovsBooleanControls.ocx </strong> which can fix a crash on clicking in some buttons.</div></blockquote><p> </p><p> Yes. This is a known issue that I had mentioned in my original WMMA thread. Thanks for pointing this out to others!</p> Quote Link to comment Share on other sites More sharing options...
mrallan Posted March 24, 2019 Share Posted March 24, 2019 "Your version of wine 1.8.6 is no longer supported upstream. You should upgrade to 3.x" - That's the error I get when I get to the installing winetricks portion of the steps. I'm running MacOS Mojave. Does anyone know the way to get around this? Quote Link to comment Share on other sites More sharing options...
The_Monk Posted March 25, 2019 Share Posted March 25, 2019 <p>This is an interesting thread, I wonder if this would work on Android.</p><p> </p><p> Might have to try on my galaxy Tablet and feed back</p> Quote Link to comment Share on other sites More sharing options...
rockambition Posted July 21, 2019 Share Posted July 21, 2019 <p>I got to the final step where I go to Mac HD, user then applications to go to new 2016. I right click and nothing happened≥ I had no choice to show package contents. When I double clicked it was an uninstall program. Trying to figure out what went wrong here.</p><p> </p><p> Update: When I go to dl ie6. Its telling me to place it in a particular folder, but the OP mentioned to keep ut where you opened wine. The folder was I believe users/myname/.cache/winetracks. I couldn’t find it anywhere. Aby help would be greatly appreciated.</p> Quote Link to comment Share on other sites More sharing options...
ViperVenom Posted July 25, 2019 Share Posted July 25, 2019 Do i need to buy another licence to have this working on my PC and Mac? Quote Link to comment Share on other sites More sharing options...
Adam Ryland Posted July 25, 2019 Share Posted July 25, 2019 <blockquote data-ipsquote="" class="ipsQuote" data-ipsquote-username="ViperVenom" data-cite="ViperVenom" data-ipsquote-contentapp="forums" data-ipsquote-contenttype="forums" data-ipsquote-contentid="41542" data-ipsquote-contentclass="forums_Topic"><div>Do i need to buy another licence to have this working on my PC and Mac?</div></blockquote><p> </p><p> It's one license per machine. If you want to use it on PC and Mac then you'd have to unlicense off one and relicense on the other each time you swap over.</p> Quote Link to comment Share on other sites More sharing options...
rockambition Posted July 26, 2019 Share Posted July 26, 2019 So I tried this again. I downloaded Ie6 and ran it again. It told me to download msie60.exe and place it in: ./cache/winetricks/ie6 then re run it. Is this a hidden area that I do not know about? I can't find it looking for it. I am pretty new to apple. When I previously tried it the other dlls and settings I had to look in worked okay so I know this is the one that is giving me problems. Please I would appreciate any help. Mike Quote Link to comment Share on other sites More sharing options...
TheTemp Posted September 25, 2019 Share Posted September 25, 2019 Just came across this thread, is there anybody who can assist me directly with getting TEW2016 to work on a Macbook? I already have Wine installed. Quote Link to comment Share on other sites More sharing options...
Judoku1819 Posted November 9, 2019 Share Posted November 9, 2019 <p>A public service announcement for anyone referring to this thread: macOS Catalina has effectively killed GDS support. </p><p> </p><p> Catalina has eliminated support for 32-bit programs. This means that CrossOver and WINE no longer have the capabilities to utilize macOS tools that used to allow running various Windows programs.</p><p> </p><p> To still use this method (at least until WINE and CrossOver update their programs) you cannot update to Catalina when prompted. If you do, none of your wine or crossover windows programs will work.</p> Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.